fbpx

How to Install a Water Softener System – Step By Step Guide

Hiring an expert plumber in Toronto can be quite expensive at times. That’s why most people try installing their water softener systems by themselves. However, installing a water softener is not as easy as it sounds because you will need detailed knowledge about using each tool correctly. And then there is the risk of causing damage to the softener or getting an electric shock while making connections. 

We have discussed safe and easy steps to install a water softener system to solve this issue. Since each step is explained in detail, there will be no chance of making a wrong connection or mixing up the steps.

This article covers the tools, materials, location, and facilities required for a water softener and provides a step-by-step guide on installing it properly. So, let’s see if you can install a water softener system on your own!

Before You Begin the Water Softener Installation

Installing a water softener system is an expensive investment. That’s why, before you install one, you should make sure whether you really need it and whether your house has the proper location and facilities to accommodate it. 

Soft water can also sometimes corrode the water pipelines and increase levels of sodium in water. Therefore, here are a few ways to decide if installing a water softener is a good option for you.  

residential water softener installation

Test the Water Supply

Mildly hard water does not require softening. You can check the hardness level of your water using a test kit for hard water or you can enquire your water supplier about how hard the water is. If the hardness level is more than 7 grains hard (per gallon), then you should consider installing a water softener system. 

Check Your Utilities

If you want to get your water tested for its level of hardness or impurity, you can book a free water test at Watermart, and they will give you more information about your water supply. A full report will be provided to you regarding the contents of your water. 

The result will also clarify whether you need a water softener or not. You can schedule a free water test now by filling out this form. If the water you use comes from a river, it is usually softer compared to water flowing through wells. 

Select Proper Location

Once you have tested the water supply and decided to invest in a plumbing water softener in your house, the first step is to find a proper location. The best place is near the main water supply of your house but before a heater unit. The main supply of water is usually in the basement or crawlspace. 

The water softener system contains a salt tank and a resin tank and is around 54-68 inches tall, so it needs a bigger space. You should also make sure that there is a 110V to 120V power supply near the water softener.  

What You’ll Need For Water Softener Installation 

You can not just start installing the water softener without access to the right tools and materials. Therefore, you must know which tools are compulsory before you start setting up the water softener system. 

Equipment/ Tools

You never know which tool you might need at the last moment when you are stuck with a wire in your hand and can not move! That’s why you should keep your full bag of plumbing tools with you to prevent any such emergency. But here are the most important ones that you should surely have for the process:

  • Hose clamp 
  • Adjustable wrenches 
  • Torch 
  • Screwdriver 
  • Screws

Materials

Usually, the materials and parts needed for the installation process are mentioned in the manufacturer’s manual. You can go through that so that you do not miss anything. Here are some important materials used for setting up the water softener system: 

  • Water softener
  • Bypass valve
  • Plastic tube
  • Compression fittings
  • Air gap fitting
  • Drain tubing

Step-by-Step Guide On Installing

Now, we will start with the main installation process. You should keep in mind that different water systems have different structures and might have some changes in their installation process, but these are the general steps that will give you a clearer idea of the process. It is better to read each step carefully and complete them one by one. So, let’s begin!

installation of water softener

Install a Bypass Valve

Every water softener comes with a bypass valve that stops the flow of water to the water softener if it’s being replaced or serviced. You can install this bypass valve at the back of the water softener system or on the main water pipeline. Tighten this valve with clips. 

Shut off the Water

The next step is to turn off the main shut-off valve and remove any water left in the pipelines. You must also turn off your heater unit before you start installing the softener system.    

Tie Into the Water Supply Line

Cut the water supply line carefully using a pipe cutter. You need to connect the water softener system lines to the main water supply lines. For this, you can either use copper piping or flexible pipes and attach elbow fittings. 

The fittings you need depend on the size and type of pipe you are using. Secure the pipes using adjustable wrenches. Connect one pipe to the inlet port of the bypass valve and one to the outlet port.

Fill and Connect the Tanks

There are two tanks in the water softener system. The resin tank contains resin beads that attract positively charged calcium and magnesium away from the water. This tank is usually built in. The second tank is the brine tank. You need to fill this tank with salt. Salt drains away these hard minerals from the resin beads. 

If there is enough space, you can either place the brine tank near the water softener or a bit further away. If you are placing it a bit away from the system, you can connect both tanks using 3/8 plastic tubing and a compression fitting. The size depends on the distance between the tanks.

Connect Drain Tubes

You need to connect drain tubes to run away water in the drainage. Connect the drain line to the drain elbow and secure it with a hose clamp. You can also connect drain tubes to air gap fittings on a washing machine if you are using one. 

Turn the Water and Start the Unit

Once everything is secured in place, turn on the main supply of water, plug in the water softener, put a water timer on, and add the hardness level of your water. Then, check the water running through your faucets, and see if you can feel any difference.

Run the Backwash Cycle

Lastly, you need to run a backwash cycle to complete the installation process. This process loosens the resin beads and helps check for leakage signs.

Do You Need an Expert, or Can you DIY it?

If you are good at DIY and have a little more than basic plumbing knowledge, there is a chance that you might be able to install a water softener system yourself. However, since you have to make many complex connections, it is better to hire a plumber to do this task for you.  

At Watermart, we have installation experts who are highly trained in carefully using the right tools. They will install the water softener system expertly, leaving no chance of loose nuts! That’s why if you are scared you might mess up installing a water softener system, you can get our water softener service for optimum results. 

Benefits of Installing a Water Softener

There are numerous benefits of installing a soft water system. The drinking water tastes better, and there will be no water spots on the sinks, utensils, or clothes. A softener elevates the quality of your home water. It also extends the life of all appliances like washing machines and dishwashers because it does not leave any stains on them. 

Once you install your water softener, you do not need to worry about getting dirty stains on your clothes, appliances, dishes, walls, or counters!

What To Do After Installing it

Like every other electrical appliance, a water softener system needs regular maintenance and checking. You should check the brine tank every month to observe the salt level. The tank’s lid can easily be opened. If the salt level seems lower, you should add more salt. 

Usually, you will only need to add salt content twice a year. Watermart also offers service contracts, where our expert plumber will check on your water softener’s performance. Replacing and maintaining it is necessary to ensure the safety of water and keep it soft. 

Conclusion

Installing a water softener system might seem complex if you are new to plumbing tools and DIY projects. In such a case, you can hire an expert plumber to do the job for you. Buying a water softener is a good choice if your water is very hard and leaves stains everywhere. 

So, what are you waiting for? If your water meets the requirements for needing a softener and your household is feasible for getting one installed, buy one from a reliable brand now and start the installation process!

FAQ’s

Can I install a water softener myself?

Yes, you can install a water softener if you are good at DIYing and have knowledge about using plumbing tools. 

When does hard water require softening?

Hard water requires softening when it reaches the hardness level of more than 7 grains per gallon. 

Do water softener systems need a drain?

Yes, to drain away water during the regeneration process in the water softener.

How To Install Whole House Water Filtration System In 2024

Installing a whole-house water filtration system is not everyone’s cup of tea. While some people manage to perform a DIY installation, others get stuck due to the use of complex plumbing tools.

Even if you have all the required equipment, securing the connections is yet another complicated task. Although the whole-house water filter setup requires good plumbing skills, you can DIY it with the right guidance regarding its installation.

That’s why, in this article, I have discussed every minor detail you need to know about the installation process. From the tools and materials needed to install the whole house water filter to a step-by-step guide on installation, there is everything that will make this task very easy for you.

So, without further ado, let’s look into the detailed guide below!

What You’ll Need For Installing Whole House Water Filter? 

To make every project successful, you should have the proper tools and materials you will need during the process. Similarly, before you start installing the whole-house water filtration system, the main question is what pieces of equipment you need to complete the setup without any complications.

Equipment/Tools Required

You will require:

  • Drill machine
  • An adjustable wrench
  • Screwdriver
  • Screws
  • Pipe fittings
  • Pipe cutter

It is better to keep all your plumbing equipment with you like a tech gun, and gauge plugs.

Materials Needed

The materials you will need before installing a whole-house water filter are:

  • A stool
  • A whole house water filter system from a reliable brand
  • Any bucket to fill the leftover water coming out from the main shut-off valve
  • Plumber’s thread tape

Once you have all the things ready, we can proceed to the main part of installing the water filter.

Step-by-Step Guide On Water Filter Installation

In this section, I have jotted down all the steps to position your whole house water filter properly in the right place. If you follow these steps carefully, by the end, you will have a whole house water filter system working in your house without any leaking or loose connections.

Plus, it will also save you the cost of hiring a plumber. Let’s start by finding the best location for the water filter setup:

If you Are in hurry you can check our infographic of water filter installation Guide:

Water Filter Installation Guide

Find the Best Location

Before you open your bag of tools and start installing them, the first question is where to install a whole-house water filter. The best place to install the water filter is near your main water supply because that is where the water enters your house’s pipelines.

It is also important to install your water filter away from humidity and moisture. That’s why the main shut-off valve is the best location to start with.

Turn off the Water Supply and Remove the Pipe Section

Once you have decided on the location, you need to turn off the main water supply. You can use a bucket to collect leftover water leaking from the valve. Next, use the measurements in the manual to measure the pipe’s size to set up the water filter.

Cut the part of that pipe very precisely and carefully. Make sure that you choose a position where you can easily replace the water filter whenever needed.

Install Filters and Shut-Off Valves

There is a manufacturer’s guide and manual with the filter that explains how to install the new shut-off valves. Use the guide to screw in the nails and fix the water filter in the right place. First, do not tighten the nuts.

Secure the Connections

When you have installed it, test the filter by running the water. Turn on the main valve and check the water in all taps. If it works according to your needs and satisfies your need for clean and pure water, go back to the filter and tightly secure it in place. You should use the plumbers thread tap to seal it in more properly, and it’s done!

Do You Need an Expert or Can DIY it?

Although it is easy to install it yourself using the manual, you can also get an expert to do it quickly and professionally. Our expert workers at Watermart are highly trained with plumbing tools and will install water filter for you and answer every query you have regarding its installation process.

We are the best water filter providers in Toronto, and we even offer customized water systems to meet our customers’ demands. The workers will also assist you with the maintenance and replacement of filter cartridges, membranes, and valves whenever required.

What Types of Impurities Do These Filters Eliminate?

Once you install the water filtration system, you will get complete access to pure water free of any impurities. The multiple-stage filtration removes 99% of chemical compounds like:

  • Nitrates
  • Sodium
  • Iron 
  • Sulfur
  • Chlorine
  • Lead

Home water filter system

It also purifies the water from dissolved solids, organic compounds, metals, and bacteria making it safer and healthier for use.

This filtered water has a better quality and a better taste than the unfiltered water. In addition to providing good quality water, the filter also removes any odors present in the liquid. The purified water is good for drinking and will also help in brighter laundry.

What Is The Aftermath of Installing Water Filtration System?

After installing a whole-house water filter, you also need to check its performance. It is important to maintain and replace filter cartridges regularly to ensure the purity of water and the safety of your health.

At Watermart, we offer service contracts where our workers will visit your place to check for any worn-out or damaged parts or clogging of valves and pipes. In any case, it is better to replace the filters after every six months. You can also monitor any changes in the pressure of water flowing in the taps. If it seems unusual, you should contact a consultant to get it checked.

Install Your Whole House Water Filter Now!

Whole house water filtration is a cost-effective, easy-to-set-up, and efficient way to filter the main supply of water in your house. It is extremely significant to remove the presence of any impurities in the water that you use for your house chores or daily consumption.

All you need is proper plumbing expertise, the right location, and a whole-house water filter, which you can simply install with your main water supply. Once installed properly, water flowing through your pipelines is free from dust particles, organic compounds, germs, and harmful chemicals like chlorine, lead, nitrates, and mercury.

So what are you waiting for? Get a whole-house water filtration system for your home now!

 

FAQ’s

How frequently should the filter be maintained or replaced?

It is preferred to replace and maintain your filters (carbon and sediment) and filter cartridges after every 3-6 months. Some people also replace their filters after 12 months.

Can I install these filters myself?

Yes, if you have a little knowledge about plumbing and its tools, you can conveniently install a whole house water filter on your own.

Are these filters suitable for well water?

Yes, it can also purify well water, but an ultraviolet (UV) filter is more suitable for well water.

How long does It take to install a water filtration system?

Installing a water filter usually takes around 2 hours. However, if you are inexperienced and setting it up for the first time, it can take comparatively longer.

How long do water filters last?

Most water filters last for 6 to 12 months. It is better to get them replaced or at least maintained within a year. Very few water filters are also known to last for two years.

How much does it cost to install a whole-house water filtration system?

Our water filter is very cost-effective, but the average cost of installing a whole-house water filter ranges between $1044 and $3266. It mostly depends upon the brand and type of water filter you choose. Call us or fill out the form to learn more about the cost of the system and its installation.